IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000020, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80733ee9a1e, address which referenced memory
Debugging Details:
------------------
*** WARNING: Unable to verify checksum for win32k.sys
KEY_VALUES_STRING: 1
Key : Analysis.CPU.mSec
Value: 5515
Key : Analysis.DebugAnalysisProvider.CPP
Value: Create: 8007007e on KAYSERI
WRITE_ADDRESS: fffff807348fa390: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
fffff8073480f2e0: Unable to get Flags value from nt!KdVersionBlock
fffff8073480f2e0: Unable to get Flags value from nt!KdVersionBlock
unable to get nt!MmSpecialPagesInUse
0000000000000020
BLACKBOXBSD: 1 (!blackboxbsd)
BLACKBOXNTFS: 1 (!blackboxntfs)
BLACKBOXPNP: 1 (!blackboxpnp)
BLACKBOXWINLOGON: 1
CUSTOMER_CRASH_COUNT: 1
PROCESS_NAME: System
DPC_STACK_BASE: FFFFF80738472FB0
TRAP_FRAME: fffff80738472a20 -- (.trap 0xfffff80738472a20)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=000050e1253ef98f rbx=0000000000000000 rcx=ffffb20ca4946000
rdx=000050e100000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80733ee9a1e rsp=fffff80738472bb0 rbp=fffff80738472cb0
r8=0000000000000000 r9=0000000000000000 r10=ffffb20caeacaf88
r11=fffff80738472e60 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz ac po cy
nt!KiExecuteAllDpcs+0x2ee:
fffff807`33ee9a1e 49894720 mov qword ptr [r15+20h],rax ds:00000000`00000020=????????????????
Resetting default scope
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000020, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80733ee9a1e, address which referenced memory
Debugging Details:
------------------
*** WARNING: Unable to verify checksum for win32k.sys
KEY_VALUES_STRING: 1
Key : Analysis.CPU.mSec
Value: 5515
Key : Analysis.DebugAnalysisProvider.CPP
Value: Create: 8007007e on KAYSERI
WRITE_ADDRESS: fffff807348fa390: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
fffff8073480f2e0: Unable to get Flags value from nt!KdVersionBlock
fffff8073480f2e0: Unable to get Flags value from nt!KdVersionBlock
unable to get nt!MmSpecialPagesInUse
0000000000000020
BLACKBOXBSD: 1 (!blackboxbsd)
BLACKBOXNTFS: 1 (!blackboxntfs)
BLACKBOXPNP: 1 (!blackboxpnp)
BLACKBOXWINLOGON: 1
CUSTOMER_CRASH_COUNT: 1
PROCESS_NAME: System
DPC_STACK_BASE: FFFFF80738472FB0
TRAP_FRAME: fffff80738472a20 -- (.trap 0xfffff80738472a20)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=000050e1253ef98f rbx=0000000000000000 rcx=ffffb20ca4946000
rdx=000050e100000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80733ee9a1e rsp=fffff80738472bb0 rbp=fffff80738472cb0
r8=0000000000000000 r9=0000000000000000 r10=ffffb20caeacaf88
r11=fffff80738472e60 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz ac po cy
nt!KiExecuteAllDpcs+0x2ee:
fffff807`33ee9a1e 49894720 mov qword ptr [r15+20h],rax ds:00000000`00000020=????????????????
Resetting default scope
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000020, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80733ee9a1e, address which referenced memory
Debugging Details:
------------------
*** WARNING: Unable to verify checksum for win32k.sys
KEY_VALUES_STRING: 1
Key : Analysis.CPU.mSec
Value: 5515
Key : Analysis.DebugAnalysisProvider.CPP
Value: Create: 8007007e on KAYSERI
WRITE_ADDRESS: fffff807348fa390: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
fffff8073480f2e0: Unable to get Flags value from nt!KdVersionBlock
fffff8073480f2e0: Unable to get Flags value from nt!KdVersionBlock
unable to get nt!MmSpecialPagesInUse
0000000000000020
BLACKBOXBSD: 1 (!blackboxbsd)
BLACKBOXNTFS: 1 (!blackboxntfs)
BLACKBOXPNP: 1 (!blackboxpnp)
BLACKBOXWINLOGON: 1
CUSTOMER_CRASH_COUNT: 1
PROCESS_NAME: System
DPC_STACK_BASE: FFFFF80738472FB0
TRAP_FRAME: fffff80738472a20 -- (.trap 0xfffff80738472a20)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=000050e1253ef98f rbx=0000000000000000 rcx=ffffb20ca4946000
rdx=000050e100000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80733ee9a1e rsp=fffff80738472bb0 rbp=fffff80738472cb0
r8=0000000000000000 r9=0000000000000000 r10=ffffb20caeacaf88
r11=fffff80738472e60 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz ac po cy
nt!KiExecuteAllDpcs+0x2ee:
fffff807`33ee9a1e 49894720 mov qword ptr [r15+20h],rax ds:00000000`00000020=????????????????
Resetting default scope